繁中 | EN
Inquire now

Solution

GT 850/950W GT

GT Series Catalog

Specification

MODEL GT III-850W GT V-850W GT III-950W GT V-950W
A. Full length 2620 (2830)(3100)(3280) 2830 (3100)(3280)
B. Full width 1515
C. Height of main arm 130 1440
D. Height of sub arm - 1330 - 1440
E. Max.radius of product 290
F. Min.distance bw 2 arms - 87 - 87
G. Stand-by of main arm 170 220
H. Stand-by of sub arm - 230 - 280
I. distance bw main arm to base 120 295 120 295
J. distance bw sub arm to base - 140 - 140
K. Maximum Distance between Main and Sub Arm 700 525 700 525
L. Max.for.Pos.of main arm 820
P. Strip stroke of main arm 655
X.Traverse stroke 1300 (1500)(1780)(1960) 1450 (1720)(1900)
U. Height of Base 275 325
W. Wing Standby Center 670730
Zm. Un/down stroke of main arm 850 950
Zs. Up/down stroke of sub arm - 850 - 950


ST 800/900 ST

    • The overall structural design has been improved to create a lightweight body, significantly reducing motor load and increasing longevity.
    • Compared to the THS series, the weight has been reduced by 20kg.
    • Compared to the HX series, the weight has been reduced by nearly 10kg.
    • An entry-level model of a fully servo motor-driven machine.
    • The entire series uses Japanese-made motors.
    • The machine adopts precision linear rails with a single-stage design.
    • The machine parts are designed with modularization, allowing for mass production and easy maintenance and replacement.
    • The machine structure is simplified and the parts are modularized for mass production, making it easy to interchange and maintain.
ST Series Catalog

制震考量1.—前後機構

減少水平面裝置負擔，有效延長馬達壽命

制震考量2.—上下機構

拉長上、下滑塊固定位置相較HX系列， 從原始的182mm拉長至274mm，提高機台剛性

翅膀的輕量-負載降低

減少水平面裝置負擔，有效延長馬達壽命

前後軸排齒傳動-提高剛性

上、下採用線性滑軌雙互補使 高效率、高剛性排齒傳動機構更加穩定

真空壓力表位置變更

調整位置減少可視區域 顯示器反光程度， 完美的跟配線箱作結合

Specification

MODEL ST III 800 ST V 800 ST III 900 ST V 900
A. Full length 2605 (2815)(3065)(3245) 2815 (3065)(3245)
B. Full width 1560
C. Height of main arm 1775 1895
D. Height of sub arm - 1775 - 1895
E. Max.radius of product 335
F. Min.distance bw 2 arms - 60 - 60
G. Stand-by of main arm 275
H. Stand-by of sub arm - 322 - 322
I. distance bw main arm to base 120 255 120 255
J. distance bw sub arm to base - 105 - 105
K. Max.for.Pos.of main arm 750 615 750 615
L. Vertical Stroke of Sub Arm 870
P. Strip stroke of main arm 585
X. Traverse stroke 1350 (1560)(1810)(1990) 1560 (1810)(1990)
U. Height of Base 450
W. Centering the Wings 670
Zm. Un/down stroke of main arm 800 900
Zs. Up/down stroke of sub arm - 850 - 950






UTS 650-1100SW/TW UTS

    • Document management system installed for effective management of arm tooling
    • Free encoding functions / 3D display showing parameters for the programmed stacking motion
    • User-friendly encoding
    • Built-in PLC software (LADDER diagram)
    • An easy-to-use teach pendant
UTS Series Catalog

Specification

MODEL UTS-650 UTS-750 UTS-850 UTS-950 UTS-1100
ITEMS SW TW SW TW SW TW SW TW SW TW
Molding Machine Size (ton) 50-120 120-180 180-250 250-350 450-550
A. Full length 1860 2200 2410 2680
B. Full width 1320 1420 1620
C. Height of main arm 1125 1200 1300 1350 1510
D. Height of sub arm 1125 1200 1300 1350 1510
E. Max.radius of product 261 313
F. Min.distance bw 2 arms 40 30
G. Stand-by of main arm 146 171 119 169
H. Stand-by of sub arm - 157 - 182 - 135 - 135 - 185
I. distance bw main arm to base 40 200 40 200 30 230 30 230 20 220
J. distance bw sub arm to base - 135 - 135 - 195 - 195 - 160
K. Max.for.Pos.of main arm 640 740 940
R. Height of Control Box 705 730 780
X. Traverse stroke 1050 1330 1310 1520 1750
U. Height of Base 250 275 325
Ym. Strip stroke of main arm 125 150 200 300
Ys. Strip stroke of sub arm - 100 - 100 - 125 - 125 - 150
Zm. Un/down stroke of main arm 650 750 850 950 1100
Zs. Up/down stroke of sub arm - 650 - 750 - 850 - 950 - 1100